FAQs

BABY-LOC Removable Fencing is manufactured with premium fiberglass poles or premium aluminum poles. Both types are non-corrosive, rust-proof, and color-matched to our black fabric.

All BABY-LOC removable pool fences are supplied with matching, neutral colored caps which fit snugly into the deck sleeve whenever the fence is removed.

As an option, BABY-LOC offers the most reliable self-closing, self-latching gate available. The unique latch uses a powerful magnet, which requires very little force to secure. It's also key lockable. Injection molded hinges can be easily adjusted with a screwdriver for just the right amount of force – so the gate closes and latches itself, every time!

Or, you can turn any section of your BABY-LOC fence into a gate opening. Simply have your installer provide a fallback hole wherever you'd like. Fence sections open in a snap for easy parent access.

The consumer products guideline for removable pool fencing is 4', and LOOP-LOC's minimum standard height on removable pool fence is 4'. It is also available in a 5' height, which meets all ASTM standards and exceeds the consumer product guidelines. 

Unfortunately you cannot use the same anchor locations for both products. In order to prevent toddlers from squeezing under the fencing, the anchors for BABY-LOC must be much closer together than those for a LOOP-LOC cover.

BABY-LOC® Removable Fencing is a convenient cost-effective way to add an extra layer of protection around your swimming pool whenever your LOOP-LOC cover is removed for the swim season. When it comes to keeping kids safe, there is no substitute for adult supervision. But no parent can be everywhere, every minute! BABY-LOC Removable Fencing is so easy to put up and take down that you'll want to use it whenever you want an extra measure of protection for your young ones.

IMPORTANT AUTOMATIC PUMP INSTRUCTIONS:

FOR SOLID COVERS THAT DO NOT HAVE DRAIN PANELS

The automatic cover pump supplied with your solid cover is used to remove water that accumulates on your LOOP-LOC cover. In addition to water accumulating due to rain and/or melting snow, water may seep up through the material seams during the winter months when snow and ice force the cover to come into contact with the pool water.

Left unchecked: there is a strong possibility that a substantial amount of pool water may be pumped out of the pool. Once the cover begins to exceed the depressed level of 16" below the deck, excess stress is placed on the cover, hardware, pool, coping and deck. At this point, cover/hardware failure is possible, which will void the cover warranty.  Loop-Loc is not responsible for any damage that may occur due to this condition.

If this pool-pumping condition exists: it is necessary to correct the pools' water level immediately.  By removing accumulated snow from the skimmer box, you will be able to check to see if the water levels have dropped and if additional water needs to be added into the swimming pool.  If uncertain, please contact your swimming pool professional immediately.

When snow and ice accumulates and remains on the solid cover it is recommended to disconnect the pump if it will be frozen in ice for an extended period of time.  It is important to immediately reconnect the pump once the snow & ice begin to melt. 

When leaving your home unattended for extended periods of time: it is highly recommended to have your swimming pool professional periodically check your water levels, or if that is not possible to have a friend or neighbor check on and fix the above conditions. 

For additional information on the Little Giant Pump model # APCP-1700 please visit their website at:

http://www.littlegiant.com

All Loop-Loc Covers meet the ASTM guidelines for Safety Covers and have been U.L. certified. As such they will easliy support the weight of a child or adult in an emergency. However, we do not recommend ever walking on the cover and children, adults, and pets should never be allowed to play on top of a LOOP-LOC or any other type of pool cover. Adult supervision is required around any swimming pool area.

To clean or clear debris off of a safety cover we recommend the use of a long handled broom, skimmer, leaf blower, or just simply hose down. It is important to remember that as a cover ages it may encounter U.V. deterioration which over time can affect the safety features. It is recommended that you periodically check your cover for signs of this, or contact your local swimming pool professional to make a determination.

All Loop-Loc covers meet the ASTM guidelines for safety covers, which state that in the event of an emergency they will easily support the weight of a child or adult.  However, we do not recommend walking or playing on the cover.  To clean or clear debris from any cover we recommend the use of a long handled broom, skimmer, leaf blower, or simply hose down the cover.  Please note: as a cover ages it may encounter U.V. deterioration which over time can affect the safety features of a cover.  It is recommend that you periodically (once or twice a year) check for signs of U.V. deterioration, or contact your local swimming pool professional to make a determination. 

In most cases LOOP-LOC covers can be repaired, but in order to make the determination the cover must be evaluated at LOOP-LOC to determine the extent of damage, along with the cost of the repair.

For holes 3" or smaller, LOOP-LOC sells Self-Adhesive Patch Kits. The patch size is 4" x 8" and come 3 to a pack. Please note that holes larger than 3" need to be sent in to be repaired in order to maintain the safety features of the cover.

For holes larger than 3", please contact the swimming pool professional that you purchased the cover from. Find their contact information here or complete a merchandise return form online and return your cover.

The automatic cover pump (supplied with your solid cover or through your swimming pool dealer) is used to remove water that accumulates on your LOOP-LOC cover. In addition to water accumulating due to rain and or snow, water may also seep up through the material seams during the winter months when snow and ice force the cover to come into contact with the pool water.

Left unchecked, there is a strong possibility that a substantial amount of pool water may be pumped out of the pool. Once the cover begins to exceed the depressed level of 16" below the deck, excess stress is placed on the cover, hardware, coping and deck. At this point, cover/hardware failure is possible, and the product warranty is void.

If this pool-pumping condition exists, it is necessary to correct the pools' water level immediately.

Please refer to the Care and Maintenance document for additional information about your pool cover.

It is important to make sure that the cover be installed – and remain – tightly stretched across your pool. The adjustable springs on your ULTRA-LOC cover should be compressed about 60% at all times. Adjust as needed to maintain this 60% compression, but may need additional adjustments to promote proper drainage. Run a garden hose over the entire cover for at least 5 minutes, simulating a heavy rainfall. If water still accumulates keep adjusting the springs until the water drains completely.

To clean drain panels that may have become clogged with debris or leaves use a long handled broom, skimmer, leaf blower, or simply hose down.  All Loop-Loc covers meet the ASTM guidelines for safety covers and have been U.L. certified.  As such they will easily support the weight of a child or an adult in an emergency.  However, we do not recommend ever walking on the cover.

When removing the cover from the swimming pool we recommend that you unhook the springs from the anchors at one end of the pool and then moving forward accordion fold the cover one section at a time. Once the cover is folded, use the storage bag provided to store your cover.

It is important to not store the cover directly on the ground, as mice like to nest inside the cover and can cause damage that will not be covered under the 15-year pro-rated warranty. A nail can be placed high up off the ground in your shed, and you can hang the cover from the nail, or the use of an outdoor garbage pail is a good alternative storing place.

Please remember when reinstalling your cover in the winter to check the tensioning of all straps every year. Covers tend to stretch out over the winter months, so upon installation make sure your cover still fits tight like a trampoline and check that your water levels are at the proper height.

During the winter months it is extremely important to make sure your water levels are proper.

The guidelines are as follows:

Mesh covers: 15" – 18" below the top of the swimming pool

Solid covers: 12" – 16" below the top of the of the swimming pool

This is important for supporting the weight of the snow on the cover. Allowing the water levels to drop below the recommendations will put excess stress on the cover, may cause damage, and will void your warranty. We recommend that you clear some snow from your skimmer box and check the water levels and add water when levels are low, or contact your swimming pool professional to come and evaluate for you.

If you have a solid cover with an automatic cover pump, please go to the care & maintenance section of the FAQ''s for more information... "What is the proper way to use the automatic cover pump that came with my cover?"

The primary cause of liner failure is neglect and improper chemical treatment. If your liner is showing signs of improper care and maintenance it is usually too late to restore the liner back to its original condition. However if you follow some simple procedures such as water chemistry, cleaning the water line, etc., your new liner will continue to serve you well for years to come. For the complete care and maintenance instructions for LOOP-LOC Luxury Liners, click here.

LOOP-LOC does not classify or attest to your swimming pool being a "diving" pool. LOOP-LOC is only manufacturing a liner to fit your swimming pool dimensions. LOOP-LOC is not responsible for designing your pool floor in regards to safety or pool type classifications.

It is important to speak with your swimming pool professional regarding this very important issue. The current standards for diving pools are established by the APSP (Association of Pool and Spa Professionals) minimum standards for residential swimming pools.  A copy of these standards may be obtained by contacting APSP online. You also may write to them at 211 Eisenhower Avenue, Alexandria, VA 22314 or call 703-838-0083.

Important: Please note that all LOOP-LOC Luxury Liners are supplied with safety "NO DIVING" signs and decals. It is the homeowner's responsibility to clearly post all of these signs and use the decals provided to warn people of the hazards of a pool. Never remove or obscure these signs. If you did not receive your signs and decals please contact your swimming pool professional or LOOP-LOC immediately.

The difference between a 20 mil liner and a 28 mil liner is in the thickness of the vinyl. Both mil thicknesses used in LOOP-LOC Luxury Liners are the highest quality virgin vinyl material available on the market today, and are covered under the same 20-year pro-rated warranty. Ultimately the choice is yours: Speak with your swimming pool professional to see which thickness is best for your particular swimming pool.

All LOOP-LOC Luxury Liners are supplied with a 20-year pro-rated warranty. This 20-year pro-rated warranty warrants the LOOP-LOC Liner is free from defects in workmanship and seam weld separation, under normal use, service and conditions, only when installation has been made by a swimming pool professional. Fill out your warranty card here.

Although we try to get as close as possible to a color match in our printed brochure and online pool liner patterns, it is recommended that you ask your swimming pool professional for a vinyl sample case to ensure accurate color match. All LOOP-LOC Luxury Liner dealers are supplied with real samples of each and every pattern we supply.

In-ground pool liners are heat sealed together to create the perfect fit for your swimming pool. Due to this a liner does have seams. Some patterns such as patterns with a white base film will show seams more so than others. Please know that some seams are more noticeable when your filter is not running and the water is still. Once the water has movement the seams do not stand out at all. Please consult your swimming pool professional for additional information when ordering.

Absolutely! Your pool contractor will first come out and carefully measure your pool. Then, LOOP-LOC will use our exclusive computerized design system to translate those measurements into a liner that will perfectly conform to the shape and features of your pool.

No. All of LOOP-LOC Luxury pool liner patterns can be ordered with just the bottom pattern design with no tile border, which is called an "all over print" liner.

LOOP-LOC's luxury liners are meant to be a centerpiece of your backyard environment. Due to this we work with our vinyl manufacturer designers to create spectacular "exclusive" patterns, custom designed to transform your swimming pool into a true work of art. Other liner manufacturers use stock patterns that can be found in numerous places. Our exclusive patterns are only offered by LOOP-LOC swimming pool professionals.

In general, most pool liners will ship within five to seven business days. At certain times of the year a liner will ship in five days or less. Please check with your swimming pool professional for an exact ship date.

LOOP-LOC is the manufacturer and as such we sell our liners through our vast network of dealers located in the United States, Canada, and internationally.  Liners must be measured and installed correctly by a professional swimming pool dealer for an accurate fit. Locate the dealer nearest you.

Loop-Loc as the manufacturer does not sell on sites like Ebay or Amazon. Loop-Loc covers are designed to meet all ASTM safety standards and U.L. certification standards. As such our products are sold through our network of Swimming Pool Professionals that are experienced in measuring and installing safety covers. If you see our covers on sites like these it is imperative to make sure that you are working with a qualified swimming pool dealer that will measure and install for you.

It is also extremely important to make sure you are getting a Genuine Loop-Loc Product. Unfortunately, Loop Loc cannot police every website out there for the people that may bait & switch, using the Loop-Loc brand name while supplying an "off" brand cover. We highly recommend visiting our dealer locator center on this site to find a qualified dealer in your area.

Yes, during the winter months it is extremely important to make sure your water levels are proper.

The guidelines are as follows:

Mesh covers: 15" – 18" below the top of the swimming pool

Solid covers: 12" – 16" below the top of the of the swimming pool

This is important for supporting the weight of the snow on the cover. Allowing the water levels to drop below the recommendations will put excess stress on the cover, may cause damage, and will void your warranty. We recommend that you clear some snow from your skimmer box and check the water levels and add water when levels are low, or contact your swimming pool professional to come and evaluate for you.

If you have a solid cover with an automatic cover pump, please go to the care & maintenance section of the FAQ's for more information... "What is the proper way to use the automatic cover pump that came with my cover?"

Unfortunately Loop-Loc Custom Covers cannot be returned or exchanged as they are specifically manufactured for each individual pool. It is important to decide before ordering and manufacturing occur on the type of cover you desire (mesh or solid) along with which color you prefer. Loop-Loc mesh and solid covers come in our most ordered color: Green to blend beautifully in any backyard environment. Mesh covers are also available in Designer Gray, Blue, Tan and Black. Ultra-Loc designer colors are Tan, Blue, and Gray.

Make sure to read through your invoice together with your swimming pool professional to review the type of cover and the color before your order is submitted.

IMPORTANT AUTOMATIC PUMP INSTRUCTIONS:

FOR SOLID COVERS THAT DO NOT HAVE DRAIN PANELS

The automatic cover pump supplied with your solid cover is used to remove water that accumulates on your LOOP-LOC cover. In addition to water accumulating due to rain and/or melting snow, water may seep up through the material seams during the winter months when snow and ice force the cover to come into contact with the pool water.

Left unchecked: there is a strong possibility that a substantial amount of pool water may be pumped out of the pool. Once the cover begins to exceed the depressed level of 16" below the deck, excess stress is placed on the cover, hardware, pool, coping and deck. At this point, cover/hardware failure is possible, which will void the cover warranty.  Loop-Loc is not responsible for any damage that may occur due to this condition.

If this pool-pumping condition exists: it is necessary to correct the pools' water level immediately.  By removing accumulated snow from the skimmer box, you will be able to check to see if the water levels have dropped and if additional water needs to be added into the swimming pool.  If uncertain, please contact your swimming pool professional immediately.

When snow and ice accumulates and remains on the solid cover it is recommended to disconnect the pump if it will be frozen in ice for an extended period of time.  It is important to immediately reconnect the pump once the snow & ice begin to melt. 

When leaving your home unattended for extended periods of time: it is highly recommended to have your swimming pool professional periodically check your water levels, or if that is not possible to have a friend or neighbor check on and fix the above conditions. 

For additional information on the Superior Pump model #92395 please visit their website at:

https://www.superiorpump.com/products/pool/92395.html

Of course!  Loop-Loc's expertly trained design team and manufacturing team will be able to match up your existing anchor locations for a perfectly fitting Safety Swimming Pool Cover.  Simply contact your swimming pool professional so that we can get started right away.  All replacement covers ship in less than two weeks all year long.

*In certain cases please note that due to Loop-Loc strictly adhering to ASTM and U.L certified guidelines an anchor or so may have to be redrilled. We will advise your swimming pool professional ahead of time if this happens.

First, thank you for your purchase of LOOP-LOC. We are happy that the cover has serviced you for many years. LOOP-LOC as the manufacturer only sells products through our large network of swimming pool professionals. We recommend that you contact the original dealer you purchased the cover from to place your new order. Find the dealer contact information, or that of another dealer by using our dealer locator.

She certainly did! "Bubbles" the female African elephant seen in LOOP-LOC advertising, was located on a protected animal preserve in Florida. She was accompanied by her professional handler so that she would feel comfortable during our photo session. Before she took her famous walk on our famous mesh safety pool cover, the LOOP-LOC cover was tested with far heavier weight, so we knew she'd be safe. Watch Bubbles' famous walk here.

LOOP-LOC Safety pool covers are manufactured to conform to ASTM standards which state that a safety cover must hold "two adults' and one child's weights" in the event of an emergency.

LOOP-LOC shows an elephant on our mesh cover to prove that we not only meet but exceed the ASTM standards. We used an elephant due to its large flat feet. Elephants do not have hooves or sharp nails like other animals. Thus the elephant, for demonstration of weight purposes, was able to walk on the cover and walk off without causing damage.

Other animals such as horses, deer and dogs can do damage to the material of the cover due to the sharpness of their hooves or paws, which unfortunately is not covered under the 15-year pro-rated warranty. It is highly recommended to add a fence around your pool area to protect your horses, or other animals with sharp hooves that may slice through the fabric of a safety swimming pool cover.

For decks and/or coping that are rough, LOOP-LOC recommends the use of additional undercover padding to prevent premature wear on the cover. Undercover padding supplied by LOOP-LOC can be purchased from your swimming pool professional. The use of indoor/outdoor carpeting can also be a good alternative to prevent premature wear in these situations.

Absolutely! LOOP-LOC's anchor-in-pipe installation is the perfect application for paver/brick decks. The pipe holds the anchors firmly into place allowing the cover to remain taut all winter long. No wear and tear on the deck and the cover will not pull or ruin pavers/bricks whatsoever. For additional information on anchor-in-pipe, contact your LOOP-LOC dealer or our customer support department.

Unfortunately you cannot use the same anchor locations for both products. In order to prevent toddlers from squeezing under the fencing, the anchors for BABY-LOC must be much closer together than those for a LOOP-LOC cover.

From the time your pool dealer submits your order to us, LOOP-LOC will ship your custom cover from our factory in two weeks or less. If you have a stock sized rectangle cover the shipping time is 24-48 hours.

Yes. If you have recently purchased a LOOP-LOC or ULTRA-LOC Safety Swimming Pool Cover, you can complete and submit your 15-year pro-rated warranty certificate online now.

*Covers purchased from Yrs. 1978 - 2003 were supplied with a 10 year Pro-Rated Warranty, Yrs. 2004 - 2012 came with a 12 year Pro-Rated Warranty. Covers purchased after 2013 were supplied with a 15 year Pro-Rated Warranty.

Loop-Loc Covers purchased from 1978 - 2003 were supplied with a 10 year Pro-rated warranty.

Loop-Loc Covers Purchased from 2004 - 2012 were supplied with a 12 year Pro-Rated warranty.

Covers purchased from 2013 - Present See Below 15 year Pro-Rated warranty information.

All LOOP-LOC mesh and solid safety pool covers come with a 15-year pro-rated manufacturer's warranty. When completed and signed by the original purchaser, this warrants that the cover is free from defects in material and workmanship under normal use, when installed by a qualified swimming pool professional. 

If any cover is found to have defects in materials or workmanship within the first 25 months of service LOOP-LOC will furnish a replacement cover, or at our option,  repairing any part or parts at no charge to the consumer. After the 25 month period has elapsed the customer will pay 1/156 for each month or part thereof since the original factory shipping date, of the current list price of the replacement cover. All repairs and replacements will be F.O.B. Pool Cover Corps plant and customers are responsible for shipping costs on repairs not covered by our warranty.

Please note any damage caused by animal damage, misuse, alteration, neglect, abuse, coping wear, drag holes, accidents, intense external thermal reaction, or if the water levels fall below the recommended levels stated in our care & maintenance instruction are not covered under the pro-rated warranty. Click here for complete warranty details.

No! It is very important to maintain proper water level to help support the weight of snow and ice on the cover and prevent excess wear. For LOOP-LOC mesh covers, water level should be 15" to 18" below the top of the pool. For ULTRA-LOC solid covers, water level should be 12" to 16" below the top of the pool. If proper water level is not maintained, the warranty will be void.

Collected water on a cover is a hazard in itself. There have unfortunately been cases of children and pets who have wandered out on a cover filled with water and slippery debris, become trapped and drowned. That is why the ASTM Performance Specification states that no pool cover can call itself a safety cover if it does not provide for water removal.

All LOOP-LOC covers meet the ASTM guidelines for safety covers and have been U.L. certified. As such they will easily support the weight of a child or an adult in an emergency. However, we do not recommend ever walking on the cover, and children, adults and pets should never be allowed to play on top of a LOOP-LOC or any other type of pool cover. Adult supervision is always required around any swimming pool area.

To clean or clear debris off of a safety cover we recommend the use of a long handled broom, skimmer, or simply hose down. It is also important to remember that as a cover ages it may encounter U.V. deterioration which over time can affect the safety features. It is recommended that you periodically check your cover for signs of this, or contact your swimming pool professional to make a determination. Adult Supervision is always required around any swimming pool area.

A swimming pool is always a magnet for children. At times when you are not around to supervise or your family is away from home, wandering children and pets from the neighborhood may attempt to enter your pool. Even if you have a locked gate (which is a great extra layer of protection), a determined toddler will often be able breach it. Only the security of a safety cover can ensure that no one will be able to gain access to the pool while you are away.

It is important to note that for a LOOP-LOC to maintain all safety features, and to maintain the 15-year pro-rated warranty, the cover must fit the exact shape of the swimming pool.

If a cover is too large or not the correct shape, there will be way too much overlap on the deck and or grass areas. If this happens the cover will wear and quickly become damaged. This damage is not covered under the warranty and is extremely costly to fix. Plus the excessive overlap will prevent the cover from having the proper tensioning, thus voiding all safety features and the pro-rated warranty.

LOOP-LOC highly recommends that if you have a form fit swimming pool you contact one of LOOP-LOC's swimming pool professionals to have your cover measured and installed correctly. Use our dealer locator to find one in your area.

Absolutely! Your pool contractor will first come out and carefully measure your pool. Then, LOOP-LOC will use our exclusive computerized design system to translate those measurements into a cover that will perfectly conform to the shape and features of your pool.

In order for a LOOP-LOC to perform properly as a safety cover, the pool must be measured and the cover installed properly by a professional pool contractor. That is why we sell our covers only through pool dealers and pool service companies. Use our dealer locator to find one in your area.

Of course, the main reason is safety. But it is also important to remember that price is a relative issue. A LOOP-LOC safety cover is built to last many, many years. In fact, LOOP-LOC covers often last many years longer than their 15-year warranty. Over that period of time, you would purchase and discard three or four ordinary pool covers.

First, make sure it says "LOOP-LOC" on your contract when you order. Then, examine your cover when it arrives. All LOOP-LOC covers (including ULTRA-LOC) have the LOOP-LOC name woven right into the straps. If you don't see LOOP-LOC on the cover, it's not a LOOP-LOC!

Absolutely not! Do not allow yourself to be misled by dealers who may try to sell you "another brand of LOOP-LOC." All of the covers we manufacture are marketed under either the LOOP-LOC or ULTRA-LOC names. Unfortunately there are many dealers out there that use "bait & switch" tactics so it is important to make sure you are receiving the genuine article.

Not at all! The safety of the cover entirely depends on the quality of its materials and manufacturing. LOOP-LOC uses materials that are in many cases far superior to those used by competitors. For example, we use double perimeter webbing and double-thick straps, extremely high-strength 302 grade stainless steel springs, and polyester bonded thread that is up to 30% stronger than that used by our competitors. We also hand inspect every stitch on every cover – and even use contrasting white thread, so our inspectors can see instantly if a stitch is missed! LOOP-LOC's founder co-invented the safety pool cover and started this company for the single purpose of creating the highest quality, safest covers available.

Underwriters Laboratories (known as U.L.) is an outside testing company. Many cover companies will claim that they meet the ASTM standard F1346-91 for manual safety covers, but have not followed up with the outside testing agencies that perform all of the actual tests listed in the ASTM guideline. At LOOP-LOC, we are so proud of the safe, high-quality cover that we manufacture that we went the extra step to confirm that we not only meet but also exceed the guidelines set forth for safety swimming pool covers, earning LOOP-LOC the U.L. seal of approval.

Since LOOP-LOC's inception in 1978, we have proudly manufactured all of our products in the U.S.A. Our 200,000-square-foot manufacturing facility is located in Hauppauge, New York. Our expertly trained personnel, from office to manufacturing, are dedicated to providing you with the safest cover on the market today and outstanding customer support.

LOOP-LOC's super dense mesh covers are offered in our best-selling green, along with our designer color series: blue, tan, gray and black. Our ULTRA-LOC lIl covers are offered in green, and designer colors: blue, tan, and gray.

LOOP-LOC's super dense mesh is manufactured with a denser weave that blocks virtually all sunlight but still lets rain and melting snow easily drain through.  It is the perfect choice for customers who want less light and debris in their pools, but still want the one-of-a-kind protection of the only pool cover proven safe and strong enough to support and elephant! Other 99% mesh covers on the market become clogged and must be scrubbed down in order to drain properly, or the manufacturer also recommends using an automatic cover pump. Avoid the hassle by purchasing LOOP-LOC's super dense mesh: no scrubbing, no pumps.

Both the original LOOP-LOC super dense mesh safety swimming pool cover and our Patented ULTRA-LOC solid safety swimming pool cover provide superior protection for your family. Mesh covers do have one safety advantage: they do not permit water to collect. In order to meet safety cover performance standards, solid covers must provide for the elimination of standing water.

Our patented ULTRA-LOC® solid safety cover is available in two versions: one with "invisible" mesh panels that allows water to drain through, and an all-solid version that is always sold with an automatic cover pump. Our ULTRA-LOC material is proprietary to LOOP-LOC and made with 100% polypropylene. The pump must be used at all times in order to maintain the safety of the cover. Ultimately, though, the choice between a mesh or solid cover is up to the preference of the user.  Please see important automatic pump instructions under the Care & Maintenace FAQ section for additional information.

All pools, when covered (no matter what type of cover you have), require winter chemical treatment to keep the water clear. Here are some helpful tips.

In the beginning of April (or at least four weeks prior to opening your pool) pour two gallons of liquid shock into the pool either by undoing a couple of springs, or directly through your mesh pool cover. Make sure to hose the cover down thoroughly.

Then one week prior to taking off your cover, add one gallon of algaecide. If you are not opening your pool until June, it is recommended you use one gallon of algaecide in May and then one gallon the week prior to the opening. A good rule of thumb: when tree leaves and flowers begin to bloom so does the algae in water, so think about shocking your pool early. It's a lot easier to kill the algae before it goes full bloom.

REMEMBER: There are many different types of algae, not only green algae. So it is important that whatever type of cover you own – mesh or solid – that you maintain proper chemicals especially when the weather turns warm.

When you''re ready to open, the most you will need to do is power vacuum the pool and start your summer chemical program.

As with our famous safety pool covers, LOOP-LOC is committed to supplying you with the finest in-ground swimming pool liner on the market today. Our liners are manufactured using only the highest quality virgin vinyl material in durable 20 and 28 mil thicknesses. Our state-of-the-art computer technology and manufacturing equipment ensures a perfect fit on any pool – from a simple rectangle to the most complex formfit.

A typical solid vinyl pool cover is little more than a tarp to put over your pool. It does not prevent children or pets from gaining access to the pool. All safety covers must conform to the Standard Performance Specification set by the American Society for Testing and Materials (ASTM). According to the ASTM, a safety cover must be able to support a certain amount of weight, not permit gaps that a child or pet could squeeze through, and remove standing water. LOOP-LOC safety pool covers far exceed minimum ASTM standards. Built from extremely strong material and secured tightly to the deck by heavy-duty springs and brass anchors, a LOOP-LOC safety cover puts a "lock" on a pool that will prevent children and pets from gaining access to the water.